Snuff Grinder - How To Make Your Own Snuff

Making your own snuff using a snuff grinder of some description is really easy.

In the below example I’ve used a small plastic snuff mill / snuff grinder - whilst it’s not designed for everyday ‘heavy’ use, (for that I would suggest a metal snuff grinder) I think from the images below you can see that making your own snuff using a snuff mill is fairly straight forward.

You could also use a salt / pepper grinder or a coffee grinder. If you want to really go back to basics, then a pestle and mortar could also be used to grind up your tobacco into snuff.

Plastic Snuff Grinder

Most snuff grinders / mills are of a similar design, they’ll generally have three parts. The first is the hand grinder at the top which you turn to rotate the grinding blades.

Snuff grinder tobacco chamber and grinding blades.

The second is the tobacco and sieve chamber. Depending on the snuff mill you’re using, this will vary in size. Some have a large capacity. The blades are usually on a spring type mechanism, this automatically pushes down on the tobacco that you’ve put in the tobacco chamber. The tobacco is pushed against the sieve and you turn the grinding handle to blend your tobacco into snuff.

Snuff Mill & Grinder

The third is the snuff chamber, or sometimes it’s a chamber that has a funnel that you place inside a suitable container whilst grinding your tobacco into snuff in the mill.

Snuff Chamber

All you then need to do is transfer your ground up snuff powder into a suitable container / or snuff box and you’re all set to use your homemade snuff.

Homemade Snuff

The tobacco used in the snuff mill for this snuff grinder experiment was sourced from a old packet of ‘Lucky Strike’ cigarettes.

The tobacco in Lucky Strike I think is ‘toasted’ and so the snuff that was created in the milling process not only looks a little like High Dry Toast, it also has a similar aroma!

I found about ten cigarettes in a kitchen drawer. I do not know how long they’d been in there, so I opened them up and removed the tobacco, placed the tobacco on grease proof paper in a baking tray, then I put it in the oven for a few minutes on a low heat to makesure the tobacco was totally dried out.

I then put the tobacco in the snuff mill’s tobacco chamber in small batches and steadily ground it down. All I was left with at the end was a few stubborn bits of stalk, which I’m sure if I had the patience I could have turned into snuff with a few more moment’s work!

Now to take a pinch of snuff. I was ‘testing’ the snuff as I was grinding it, purely for research purposes you understand - the line of snuff you see below was my first ‘big’ pinch after already deciding the snuff was good due to these earlier tests…!

Snuff

So that’s the left nostril done, now for the right nostril!

Line Of Snuff

Right nostril done and no sneezing… Or should I say ‘with no grimace‘?!

Snuff Finished… Or that’s E’snuff!

The strange thing being, is that the wooden snuff box that I transferred the home made snuff into, had previously been full of a menthol snuff. This added a slight menthol flavour to the snuff that wasn’t at all un-pleasant!

Snuff Grinder

So there you have it, if you’re interested in DIY snuff making get yourself a snuff grinder of some description and have a go!

Tags: , , , , , ,

2 responses so far ↓

  • 1 rizza // Oct 24, 2008 at 5:35 am

    how does it work? does the blade cut the tabacco or its just pushing it?
    just wondering.

  • 2 zazzz // Jul 11, 2011 at 12:17 pm

    I made my own, because I seem to have a light addiction… I think that’s a bad thing, but my snuff seems to have an unusual aroma. Actually like toast. Is that where the name comes from? I was just wondering if I did it right.
    thanks

You must log in to post a comment.


Snuff Store    Snuff News    My Account    New Products    Shopping Cart    Checkout    Privacy Policy   About Us   Suppliers - Wholesale  Overseas Purchase  Payment   Print Catalogue
Sunday 04 November, 2007
Antique Snuff Boxes

Copyright © 2007 Snuff Store.